Adding a Netflow Listener to Cacti

This article explains how to add new Netflow listeners to Cacti. By default, Cacti is not able to show Netflow reports. So, to follow the steps in this article, the Flowview plugin have to be installed on Cacti.

1. Configure Cacti server to receive and store the netflow files adding the lines shown below, one line for each router:

vi /etc/flow-tools/flow-capture.conf

-V 5 -w /var/flow/ABC-Router -n 275 -N 3 -E500M 0/0/3001
-V 5 -w /var/flow/DEF-Router -n 275 -N 3 -E500M 0/0/3002
-V 5 -w /var/flow/GHI-Router -n 275 -N 3 -E500M 0/0/3003
-V 5 -w /var/flow/JKL-Router -n 275 -N 3 -E500M 0/0/3004
-V 5 -w /var/flow/MNO-Router -n 275 -N 3 -E500M 0/0/3005
-V 5 -w /var/flow/PQR-Router -n 275 -N 3 -E500M 0/0/3006
-V 5 -w /var/flow/STU-Router -n 275 -N 3 -E500M 0/0/3007
-V 5 -w /var/flow/VWX-Router -n 275 -N 3 -E500M 0/0/3008
-V 5 -w /var/flow/XYZ-Router -n 275 -N 3 -E500M 0/0/3009

Continue reading “Adding a Netflow Listener to Cacti”

Traffic Classification and Marking on Cisco IOS

In this article I will show how to mark IP packets to prioritize multimedia and critical applications following a QoS policy that will be later enforced inside the ISP cloud.

1. The QoS service offered by the ISP allows for control of how traffic is prioritized and bandwidth is reserved, with three queues available as shown in the figure below.

Continue reading “Traffic Classification and Marking on Cisco IOS”