This article shows 2 ways to control the path of packets leaving an autonomous system:
- Changing the exit route to a given prefix
- Changing the exit route to a given autonomous system
The commands below are related to the following diagram: Continue reading “BGP Path Control on Junos”
Power over Ethernet (PoE) enables a power sourcing equipment (PSE) to supply power to powered devices (PDs).
To display the mapping between a PSE ID and the LPU (Line Processing Unit – “Slot”) of an interface card, execute the display poe device command.
Continue reading “PoE on HP Switches”
1. Log into Nexus and copy the .bin files to the bootflash:
NEXUS7000# copy tftp://10.9.62.51/n7000-s1-dk184.108.40.206a.bin bootflash:
NEXUS7000# copy tftp://10.9.62.51/n7000-s1-kickstart.6.2.8a.bin bootflash:
Continue reading “Firmware Upgrade Nexus 7000”